We offer you an unedged board from ash, wholesale. The minimum order is 1 truck.
Different grades and sizes. Board AD or KD .
Ukrainian ash often has an olive-colored core, which does not affect the quality, only the color of the finished product.
Standard sizes of an oak board:
Length - 3m
Thickness: AD 54mm, KD 50mm
AD 35mm, KD 32mm
Technical specification for ash board
The quality of the goods must meet the requirements below:
Requirements for logs: Timber made of round wood: 1 and 2 grades, and diameter from 30cm +. The width is measured in the middle and the boards from bark to bark, on the narrower side. Humidity of KD - 9% (+/- 2)
Ash
+38 (0472) 54 35 66
+38 (0472) 32 36 22
Limited Liability Company
Grade „PLUS” (grade A)
A Side: clear, without knots (the allowed knot is to 5mm) without any defects (without changing of the color, without wood decay, without sapwood, without mechanical damages, cracks, pavements). The core is not allowed.
Board, width 28 and 30mm: the damages are allowed in the middle of the board, if from one side till another there are 130mm to the bark. In that case, the reduction will be done, which will cover this damage.
Board, width 50+mm: the damages are allowed in the middle of the board, if from one side till another there are 150mm to the bark. In that case, the reduction will be done, which will cover this damage.
В Side: the same requirements as for the side A, but one knot to 20mm for 1 linear meter is allowed.
The width 15 + cm (in general, the width 20cm)
The length 2.3 + m
The curvature: to 10mm for 1 linear meter
The core: The core is allowed, in case if there wasn’t any reduction.
Grade „STANDART”
(grade АВ)
Side A: 3 knots to 30mm, or 2 knots to 40mm, or 1 knot to 50 mm without reduction. If there is the core – the reduction is done. (In the width 40-50mm – the reduction is 15 sm, in the width 30 mm – the reduction is 13 cm). The core is allowed to 50% of the width, without color changes, the core must have one color.
Allowed: propping out knots to 20mm. If one side is clear, there could be alive knots on the other side.
Not allowed:
changing of the color, wood decay, sapwood, mechanical damages, cracks, pavements
Board, width 28 and 30mm: the damages are allowed in the middle of the board, if from one side till another there are 130mm to the bark. In that case, the reduction will be done, which will cover this damage.
Board, width 50+mm: the damages are allowed in the middle of the board, if from one side till another there are 150mm to the bark. In that case, the reduction will be done, which will cover this damage.
Side В: the same requirements as for the side A, the core without abrigment
The width: 15 + cm(in general, the width is from 20cm)
The length: 2300 + mm
The curvature: to 30 mm for 1 linear meter
The core: The core is allowed, in case if there wasn’t any reduction.
Grade„RUSTIC“ (grade В)
The length: 2m+ do 3,5m
The width: from bark to bark 15+cm
A/B Sides: Knots to 80mm, tobacco knots are allowed to 60mm.(dead knots)
Not allowed: wood decay, sapwood, mechanical damages, cracks, pavements
The curvature: the form of the banana
The width: 150 + mm (in general. The width is from 200mm)
Wood processing shop:
Cherkasy region, Smilyansky district,
Village Balakleya
IST-WOOD-TRADE
City Cherkasy, 18000
Street Blahovisna, 210, c . 31
+38 0472 33 37 10
+38 0472 54 35 66
office@istwoodtrade.com.ua
0674707509@ukr.net
